Calibrating a Beacon's Measured Power
It is recommended that you perform calibration using an iPhone 5S as a referenceable standard mobile device. The mobile device should be in portrait orientation and the top half of the device should be not be covered by your hand, a case, or anything else that would obstruct line-of-sight to the beacon. From the Settings view, press Calibrate and maintain the position of the mobile device 1 meter away from the being being calibrated.
Press Begin Calibration to start collecting RSSI measurements. If at least 30 valid measurements are collected then you will be prompted to copy the resulting calibration value to the Measured Power field of the beacon settings view. You must Apply the settings to update the Measured Power on the beacon device.