The button is used to set the RadBeacon Dot beacon into one of several operating modes.
- OFF - No advertisements are being transmitted. Your beacon is off.
- ON - Proximity advertisements are being transmitted.
- CONFIGURABLE - Beacon is discoverable and connectable by a valid configuration app like RadBeacon for iOS, Android or OS X.
Your beacon is shipped in the OFF mode.
Click the button once and you should see a SINGLE GREEN FLASH. This indicates that the beacon has transitioned to the ON mode.
Click the button once again and you should see a SINGLE RED FLASH. This indicates that you are back in OFF mode.
Now that you are a beacon button expert, click the button again so that you see a SINGLE GREEN FLASH and set your beacon back into ON mode.
From the ON mode, press and hold the button for approximately 5 seconds, or until you see a DOUBLE GREEN FLASH. This indicates that the beacon has transitioned to the CONFIGURABLE mode.
Using the RadBeacon app for iOS, Android or OS X, scan for configurable beacons and follow the instructions for selecting and configuring your beacon.